Operator`s manual


3-1 MOUNTING PROCEDURES
A. MOUNTING THE ATN NVM-14 TO A HEADMOUNT
To mount the ATN NVM-14 to a headmount, perform the following :
1. Loosen the screw (A). Push the button (B) and insert the rail of
the NVM-14 into the socket (C) of the headset.
2. Place the headmount with NVM-14 onto a head.

relief adjustment.
4. The NVM-14 headmount has a flip-up mechanism. Push the
button (D) on the side of mount and lift the unit up until the unit

top/up position it will turn off automatically.
5. Push the same button (D) to lower NVM-14 to the viewing
position. Turn the device on for continuation of the operation.
6. The NVM -14 c an b e plac e d befor e the right or lef t eye. In order
to re-adjust the monocular for use with another eye, take the

mount it on the headset through the rail on this side. Push

comfortable position.
Figure 3-1
Attaching ATN NVM-14 to Head Mount
A
B
C
D
E
F