Installation Guide

1
Apply putty to underside of DRAIN PLUG (1) and drop into
drain outlet.
Slip RUBBER WASHER (2) on from below and thread
DRAIN PLUG (1) into DRAIN ELL ASSEMBLY (3).
PUTTY
BATH DRAIN OUTLET
SEALANT
SEALANT
3
1
2
Loosen SLIP JOINT NUT & SEAL (1) and install onto OVERFLOW TUBE (2). Install
OVERFLOW TUBE ASSEMBLY (2) into the appropriate leg of the DRAIN TEE (3).
Apply sealant to threads of TAILPIECE (6) and thread into DRAIN TEE (3). FIG.1.
Loosen SLIP JOINT NUT & SEAL (4) and install onto DRAIN ELL
ASSEMBLY (5). Install DRAIN ELL ASSEMBLY (5) into the horizontal
leg of the DRAIN TEE (3). FIG. 2.
2
2a
1
4
4
2
3
6
5
INSTALL DRAIN PLUG AND ELL
(STANDARD AND OVER-THE-RIM DRAINS)
INSTALL OVERFLOW ASSEMBLY AND DRAIN TEE (OVER-THE-RIM DRAIN)
INSTALL OVERFLOW ASSEMBLY AND DRAIN TEE (STANDARD DRAIN)
FIG.1
FIG.2
FIG.2
NOTE: TUB IS SHOWN CUT AWAY
FOR CLARITY OF INSTALLATION.
NOTE: TUB IS SHOWN CUT AWAY
FOR CLARITY OF INSTALLATION.
NOTE: TUB IS SHOWN CUT AWAY
FOR CLARITY OF INSTALLATION.
753995-100 Rev. D
1
2
3
6
FIG.1
Loosen SLIP JOINT NUT & SEAL (1) and install onto OVERFLOW TUBE (2). Install
OVERFLOW TUBE ASSEMBLY (2) into the appropriate leg of the DRAIN TEE (3).
Apply sealant to threads of TAILPIECE (6) and thread into DRAIN TEE (3). Install
OVERFLOW GASKET (4) to OVERFLOW TUBE ASSEMBLY (2). (Adjust OVERFLOW
GASKET (4) to couture of tub. FIG.1.
Loosen SLIP JOINT NUT & SEAL (5) and install onto DRAIN ELL
ASSEMBLY (6). Install DRAIN ELL ASSEMBLY (6) into the horizontal
leg of the DRAIN TEE (3). FIG 2.
5