Instruction manual
www.DaikinApplied.com 7 OM 751-4
Description Acronym/Abr.
National Electric Code NEC
Outside Air OA
Outdoor Air Coil Temperature OACT
Outside Air Dampers OAD
Energize Exhaust Fan OAD Setpoint OADE
OAD Min Position High-Speed Setpoint x OADE
OAD Min Position Low-Speed Setpoint OADL
OAD Min Position Med-Speed Setpoint OADM
Outdoor Air Damper Position OADP
Outdoor Air Enthalpy OAE
OAD Lockout Setpoint OALS
OAD Max Position Setpoint OAMX
Outside Air Temperature OAT
Occupied Cooling Setpoint OCS
Occupied Heating Setpoint OHS
Occupancy Override Input OOI
Occupancy Sensor Input OSI
Proportional Integral PI
Parts Per Million PPM
Positive Temperature Coefî‚¿cient PTC
Relative Humidity RH
Space Humidity Setpoint RHS
Read Only RO
Read Write RW
Standby Cooling Setpoint SCS
Standby Heating Setpoint SHS
Thermal Expansion Valve TXV
Unoccupied Cooling Setpoint UCS
Unoccupied Heating Setpoint UHS
Unit Ventilator UV
Unit Ventilator Controller UVC
UVC (Heat/Cool) Mode Output UVCM
UVC State Output UVCS
Wet Heat Valve Position VALP
Ventilation Cooling Low Limit Setpoint VCLL
Ventilation Cooling Lockout VCLO
Ventilation Cooling Setpoint VCS
Wet Heat WH
Source (water in) Temperature Differential WITD
IntroduCtIon