Installation Guide

- 2 -
1
M965725 Rev. 1.0 (7/16)
TRIM INSTALLATION
2
HANDLE INSTALLATION
• Install HANDLE ADAPTER (1) onto VALVE STEM (2).
• Install HANDLE SCREW (3) and tighten.
• Push HANDLE BASE (4) onto HANDLE ADAPTER (1).
• Align LEVER HANDLE (7) and push into HANDLE BASE (4).
• Use HEX WRENCH (5) supplied and tighten SET SCREW
(6) to secure HANDLE (7).
1
2
3
• Place ESCUTCHEON (1) onto ESCUTCHEON
HOLDER (2).
• Align ESCUTCHEON (1). Thread ESCUTCHEON
HOLDER (2) onto DIVERTER VALVE (3).
• Tighten until ESCUTCHEON (1) is snug against
nished wall.
2
1
3
4
5
6
7
3
OPERATING THE VALVE
• Turn water supply on and test installed tting.
• Rotate handle to all diverter positions to check operation of valve.
• Check for leaks.
OFF