Technical Specifications

ADA COMPLIANT EPA
WATERSENSE®
CERTIFIED
© 20167 AS America, Inc.
GENERAL DESCRIPTION:
Cast brass valve body. The single unit contains two
handles, the bottom lever handle sets the desired
temperature and the top handle functions as an on/off,
volume control. The temperature is maintained by a
wax element moving a shuttle valve between hot and
cold. The volume is controlled by twin ceramic disc
valve cartridges. Ceratherm includes Hot Limit Safety
Stop. Escutcheon plate is stamped brass. Available
with 1/2" or 3/4" NPT inlets and outlets. The valve has
a high ow rate, ideal for mutiple outlet installations.
PRODUCT FEATURES:
Brass Casting: Highest quality faucet material for durability & long life.
Wax Thermostatic Unit: Permits shuttle valve to move between the hot
and cold seat to maintain the pre-selected constant water temperature.
Back to Back Capable: Hot and cold can be reversed.
Spring-Loaded Check Valves: When the hot and cold water enters
the tting, both supplies pass through the spring-loaded check valves
to prevent cross ow of hot and cold water.
Integrated Stop Valves: Ensure easy cleaning and servicing.
Adjustable Hot Limit Safety Stop: Limits the amount of hot water
allowed to mix with cold. Reduces the risk of accidental scalding.
PATIENCE
™
TWO-HANDLE THERMOSTAT
8/17
H
C
MODEL NUMBER:
TRIM KIT:
❏ T106.740 Two-Handle Thermostat Trim Kit
With separate volume control. LESS Valve.
ROUGH VALVES:
TEMPERATURE & ON/OFF VOLUME CONTROL ONLY
❏ R520 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control. LESS Trim.
❏ R540 Rough Valve Body only
3/4" NPT inlets/outlets. With separate volume control. LESS Trim.
TEMPERATURE & ON/OFF VOLUME CONTROL & BUILT-IN DIVERTER
❏ R522 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control and built-in
2-way diverter. LESS trim.
❏ R523 Rough Valve Body only
1/2" NPT inlets/outlets. With separate volume control and built-in
3-way diverter. LESS trim.
SUGGESTED SPECIFICATION
Two-handle Thermostat shall feature a cast brass valve body. Thermostat shall be a wax element shuttle valve. Shall also
feature ceramic disc valving, 1/2" NPT or 3/4" NPT inlets and outlets. Fitting shall be American Standard Model # T106.740.___
(Trim Kit) and R52_ or R540 (Rough Valve).
204 mm
(8")
171 mm
(6-3/4")
70 mm
(2-3/4")
150mm
(6")
NOTE: FITTING
MUST BE INSTALLED
WITH VOLUME CONTROL
ON TOP.
R520
1/2" NPT INLETS
or
R540
3/4" NPT INLETS
102 mm
(4")
70 mm
(2-3/4")
204 mm
(8")
21 mm
(7/8")