Installation Guide

710443-100 Rev. 2 8/20
5
2f
2d
[28]
2e
[28]
2g
[3]
[4]
2h
[5]
2b
[23]
[6]
2a
[28]
[6]
[7]
In Step 2, we will cover installing the floor U Channel and Bottom Guide.
This will require parts 3, 4, 5, 6, 7, 21, 23, 28, 31 and 32.
2a. Place U Channel [28] and Bottom Guide [6] on the Fixed Wall Post [21] side on the edge of
the shower base threshold.
NOTE: The smaller side of the Bottom Guide is meant to hold the Fixed Panel [31] (with the
rubber Shim [7]), while the larger side is meant to hold the sliding Door Panel [32]
(without rubber Shim [7] ).
2c. Mark a line on the outside of the U Channel, also marking center mounting hole of Bottom Guide
on shower threshold.
2e. Place U Channel back onto threshold at marked line and press down to hold securely in place.
2f. Drill pilot hole for the center mounting hole for the Bottom Guide using 1/4" (6mm) drill bit.
2g. Apply clear silicone sealant to wall anchor, then insert Wall Anchor [4] into pilot hole and fasten
Bottom Guide [6] using M4x35 [3] Pan Head Screw.
2h. Cover screw hole in Bottom Guide using Screw Cover Cap [5].
2d. Remove protective paper from adhesive tape on bottom of U Channel [28].
2b. Align U Channel [28] and Bottom Guide [6] with center of Fixed Wall Post [21] keeping the same
distance from the showers threshold edge.
2
2c
[28]
Edge of Shower
Base Threshold