Installation guide

754695-1004
1 2
Remove faucet spout from wall.
Some faucets have set screws on the
bottom of spout. And need an Allen
wrench to be removed.
Remove faucet spout from wall
Some faucets only need to be twisted
to be removed.
After removing faucet
check if the water inlet
pipe, is threaded or
non-threaded. For
non-threaded pipe use the
SHARK BITE FITTING to
attach to HAND HELD
HOSE.
3 4
Add LEVELING FEET to FRONT
TUB SUPPORTS.
Add LEVELING FEET to
LOWER FRAME.
Threaded
Non-Threaded
Remove
Knob
Remove
Knob
Insert
Threaded
Foot
Insert
Threaded
Foot
Pre-Welded
Nut