Operating instructions

Pub. No. 18-HE53D1-5 Numbers in [brackets] are for 50 Hz international systems. 15
Installer’s Guide
5. Press the power button to turn on the air cleaner.
NOTE: Once you press the power button, the first
LED will be on and it will start flashing after the
first 10 [12] minutes of indoor fan operation. This
is normal operation.
Figure 36
Plug Power Cord
in here
Power Button
2. Once vacuuming is completed on one side of the
COLLECTION CELL, turn the COLLECTION CELL
over and repeat on the other side of the COLLEC-
TION CELL.
NOTE: It is normal for COLLECTION CELLS to
discolor during operation. Vacuuming will not
restore the COLLECTION CELLS to their original
color. However, vacuuming does restore the
COLLECTION CELLS to a high efficiency.
REPLACING THE PRE-FILTER AND COLLECTION
CELLS INTO THE AIR CLEANER
1. Replace the PRE-FILTER into the air cleaner. Ensure
that the "AIRFLOW indicator arrow" on the
PREFILTER is pointing in the same direction as the
"AIRFLOW indicator arrow" on the air cleaner cabinet
as shown in Figure 33.
2. Reinstall the COLLECTION CELLS into the air cleaner.
Ensure the handles on both of the COLLECTION
CELLS are folded flat as shown in Figure 34.
Handles Fold
Flat
3. Replace the power door onto the air cleaner.
Figure 35
Cabinet Edge
1. Using a vacuum hose, vacuum in even strokes across
the entire COLLECTION CELL surface. Vacuum
using even strokes in one direction, then repeat the
process using even strokes in the opposite direction,
as demonstrated in Figure 32.
Figure 34
Figure 32
4. Ensure the power cord is plugged into the air cleaner.
Figure 33