Installation Guide

- 4 -
755906-100 Rev. 1 06/20
8
Installation of Corner Caddy
a. Ensure the marked caddy corner along the shower wall is clean and clear of debris.
b. Wipe the area clean with a standard isopropyl alcohol cleaner.
c. Allow the alcohol to fully dry before applying the caddy to the wall.
d. Press the corner caddy into place at the previously marked location. Ensure the caddy’s perimeter is
pressed rmly in place with no gaps.
e. Once the caddy is securely in place, apply the silicone sealant around the caddy’s edge.
Note: The extreme temperature ranges will impact initial adhesion of the butyl tape. The caddy may require
additional tape around the perimeter to secure the caddy in place during the curing process.
WARNING: Do not put weight on the shelf for at least 24 hours
Refer to Tub or Shower Wall installation instructions (755905-100) for cleaning instructions.
FIGURE 8
Each shelf backside cavity is required to be lled 3/4" in depth with the
wall adhesive which provides support between shelves cavity when dry.
See FIGURE 8.
7
BACK
3/4" ADHESIVE
BETWEEN
SHELVES
3/4" ADHESIVE
BETWEEN
SHELVES
3/4" ADHESIVE
BETWEEN
SHELVES
3/4" ADHESIVE
BETWEEN
SHELVES