Operating instructions

8 32-5027-11
User’s Information
7. OPERATION – Your warm air furnace should not be
operated in a corrosive atmosphere. Paint solvents,
cleaning chemicals, spray propellants, and bleaches
should not be used in the vicinity of the furnace during
normal operation.
8. CONDENSATE DRAINS – If you have a cooling coil
installed with your furnace, condensate drains should be
checked and cleaned periodically to assure that conden-
sate can drain freely from coil to drain. If condensate
cannot drain freely water damage could occur. Furnace
drain should also be checked & cleaned at the start of
each heating season.
9. AIR CIRCULATION – To ensure increased comfort, the
blower on this unit may be operated continuously for
both heating and cooling. This will result in constantly
filtered air and aid in maintaining more even tempera-
tures by avoiding temperature stratification throughout
the conditioned area. To accomplish constant air
circulation, set your thermostat fan switch to “ON”.
▲
WARNING
!
Should overheating occur, or the gas supply fail to shut off,
shut off the manual gas valve to the furnace before shutting
off the electrical supply.
In the event that electrical, fuel or mechanical failures occur,
the owner should immediately turn off the gas supply at the
manual gas valve located in the burner compartment and
electrical power to the furnace and contact servicer.