User`s manual

SummaCut cutter User’s Manual
Contour Cutting 3-18
8. Press or to change the value to ‘ON’.
‘ON’ will appear on the LCD.
9. Press to confirm.
An asterisk will appear before ON, indicating it is now the selected setting.
10. Press twice to leave the menu.
11. Register the markers and cut the first contour as described in sections 3.3.5 and 3.3.6.
The cutter will stop after the first contour has been cut and come online again.
12. Raise the pinch rollers and manually remove the sheet.
13. Insert the next sheet into the cutter. Lower the pinch rollers.