Operation Manual

14
• TWO HOUR TEMPERATURE OVERRIDE
Press
or until the display shows
the temperature you want. The thermostat
will override current programming and keep
the room temperature at the selected tem-
perature for two hours. After two hours, the
thermostat will automatically revert to the
program.
• HOLD TEMPERATURE — The thermostat
can hold any temperature within its range for
an indefinite period, without reverting to the
program. Press
HOLD
TEMP
HOLD will be dis-
played. Then choose the desired hold tem-
perature by pressing
or . The
thermostat will hold the room temperature at
the selected setting until you press
RUN
PRGM
to
start program operation again. This feature
is ideal for energy conservation when the
building is unoccupied for an extended pe-
riod of time.
• °F/°C CONVERTIBILITY — Press
TIME
FWD
and
TIME
BACK
at the same time until the temperature
display is in °C (Celsius). To display °F,
repeat the process.
• LOW BATTERY INDICATOR — The word
BAT will flash on the display when the battery
is low and should be replaced.
• AUDIO PROMPTING — Each time you press
a button, the thermostat will beep.
• BACKLIT DISPLAY — When you press any
button on the thermostat, the display is lit for
approximately eight seconds (this feature
works only when the thermostat is attached to
the wall and 24VAC power is present to the
thermostat).