Installation & Assembly

- 2 -
1
M965727 Rev. 1.0 (7/16)
2
HANDLE INSTALLATION
TRIM INSTALLATION
• Install HANDLE ADAPTER (1) onto VALVE STEM (2).
• Install HANDLE SCREW (3) and tighten.
• Align HANDLE (4) and push onto
HANDLE ADAPTER (1).
• Tighten SET SCREW (5) with HEX WRENCH (6)
supplied with trim kit.
3
OPERATING THE VALVE
• Turn HANDLE into OFF position.
• Turn on water supplies, and check all connections for leaks.
• Operate HANDLE to ush water lines thoroughly.
• Turn handle OFF.
1
3
6
2
4
5
6
5
4
2
1
3
OFF
ON
• Push VALVE COVER (1) over VALVE CARTRIDGE (2) until it is seated against the stop.
• Place ESCUTCHEON HOLDER (3) over VALVE COVER (1). Line up holes in ESCUTCHEON HOLDER (3)
with THREADED TABS (4) on VALVE.
• Install MOUNTING SCREWS (5) through ESCUTCHEON HOLDER (3) and into THREADED TABS (4).
Tighten SCREWS securely.
• Place ESCUTCHEON (6) over ESCUTCHEON HOLDER (3) and push evenly for a snap t.