Specifications

J10
© 2020 AS America Inc.
spec_0545_000EdgemereUnderctrSink Rev. 1 12/20
EDGEMERE
®
UNDER COUNTER SINK
VITREOUS CHINA
BARRIER FREE
EDGEMERE
®
UNDER COUNTER SINK
❏ 0545.000
• Rectangular under mount sink with tapered
interior bowl
• Made from vitreous china
• Unglazed rim
• Front overow
• Supplied with mounting kit and template
• Coordinates with Edgemere
®
Suite
Nominal Dimensions:
18-1/2" x 16-1/8"
(471 x 410mm)
Bowl Size:
16-3/4" (426mm) wide
14-3/8" (365mm) front to back
3" (77mm) deep
Compliance Certications -
Meets or Exceeds the
Following Specications:
• ASME A112.19.2/CSA B45.1
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
WE RECOMMEND USING BASIN AS A TEMPLATE TO DETERMINE PROPER CONTOUR.
CUT COUNTERTOP 38MM (1-1/2") INSIDE BASIN CONTOUR.
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIED AND “P" TRAP ARE SUGGESTED.
▼ UNDERCOUNTER MOUNTING KIT SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances
established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is assumed for
use of superseded or voided pages.
SUGGESTED ADA INSTALLATION
SUPPLIES
AS REQ'D
1-1/4" O.D. WASTE
COUNTERTOP
(BY OTHERS)
BARRIER
FREE
CLEARANCE
2"
(51mm)
16-1/8"
(410mm)
24"
(610mm)
4"
(102mm)
8" MAX
(205mm)
14-3/8"
(366mm)
16-3/4"
(426mm)
18-1/2"
(471mm)
5-1/4"
(132mm)
3-1/8"
(80mm)
8"
(203mm)
34" MAX
(864mm)
27" MIN
(686mm)
9" MIN
(229mm)
6" MAX
(152mm)
11" MIN
(280mm)
23-1/2"
(597mm)
21"
(533mm)
FINISHED
FLOOR
5/8"
(16mm)
2"
(51mm)
FAUCET MOUNTING HOLES:
SINGLE HOLE, 4"(102mm) OR 8"(203mm)
MEETS THE AMERICANS WITH DISABILITIES A
CT GUIDELINES
AND ICC ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 102mm (4") minimum from front edge
of countertop provides 686mm (27") knee clearance area.