Installation Guide

710443-100 Rev. A 8/18
5
2
INSTALLING FLOOR U CHANNEL AND BOTTOM GUIDE
1a. Place U Channel [28] and Bottom Guide [6] on Fixed Wall Post [21] side of threshold edge of shower pan.
NOTE: One side of Bottom Guide is meant to hold the Fixed Panel [31] (with the rubber Shim [7] ), while the other side is
meant to hold the sliding Door Panel [32] (without rubber Shim [7] ).
1b. Align U Channel [28] and Bottom Guide [6] with center of Fixed Wall Post [21] keeping the same distance from the showers
threshold edge.
1c. Mark a line on outside of U Channel also marking mounting hole of Bottom Guide on shower threshold.
1d. Remove protective paper from adhesive tape on bottom of U Channel [28].
1e. Place U Channel back onto threshold at marked line and press down to hold securely in place.
1f. Drill pilot hole for Bottom Guide using 1/4" (6mm) drill bit.
1g. Insert Wall Anchor [4] into pilot hole and fasten Bottom Guide [6] using M4x35 [3] Pan Head Screw.
1h. Cover screw hole in Bottom Guide using Screw Cover Cap [5].
1a 1b
1c
1d 1e
1f
1g
1h
[28]
[28]
[28]
[28]
[23]
[6]
[3]
[4]
[5]
[6]
[7]
[28]