Installation Guide

2
INSTALLING FIXED PANEL A & B
2a. Insert Fixed Panel A [10] into narrow slot of Wall Post [1].
2b. Ensure Fixed Panel A [10] fully fits into the channel of Wall Post [1].
2c. Insert Adjust Fixtures [15] into notches of the Wall Post [1] and lightly screw into place using M4x16
Screw [14] at 3 locations.
2d. Level [B] Fixed Panel A [10] and fully tighten each of the M4x16 Screws [14]. Install Fixed Panel B [11]
in the same way.
• In this step, you’ll need following part: [10] x1, [11] x1, [15] x6, [14] x6
• In this step, you’ll need the following tool: G
[10]
[15]
[14]
Screw
M4x16
G
View from Inside
View from Inside
View from Outside
View of
Countersunk
Hole
[11]
View from
Inside
B
2a
2c
2b
2d
[10]
[1]
[1]
[1]
[1]
[15]
[10]
[10]
[10]
[15]