Installation Sheet
QCI5301 Rev 1 Page 23 Cered 6/5/2017
27 Lift the Outer Panel Assembly into place.
Set the rollers in their grooves on the top of the
header. Make sure the glass is inside the lip
on the track.
25 To prevent scratching the header during glass installation, apply masking tape to the front face
of the header.
26 Lift the Inner Panel Assembly into place and be sure
the rollers are in the track. Slide the Panel to 1 wall. It is
easiest to set the glass near the middle of the header.
The glass is not secure yet. Do not leave unattended.
Moving it may cause the glass to fall.
Side View
Side View