Installation Guide

6
710286-100 Rev. 2 03/2020
4
OUTSIDE VIEW
2A1A
INSTALLING FRAME
2 PEOPLE REQUIRED
VIEW FROM INSIDE
1A and 2A Secure assembly to wall using previously drilled holes.
Fix e d Pa n e l
Ensure door assembly is centered in opening. Push door
assembly down to top of tub before anchoring screws to
wall posts.
1A & 2A — Drill Pilot Holes
1B & 2B — Place plastic Cupped Washers (22) over
M4x10 screws and screw into place at each pilot hole.
1C & 2C — Snap Screw Cover Caps (3) over each screw head.
5
FIXING ASSEMBLY TO WALL POSTS
1 2
NOTE: The Cupped Washers (22) hold Screw Cover Caps
in place. Apply silicon sealant onto threads of
screws before screwing into place.
1A
Screw M4x35 and Cupped Washer (22)
VIEW FROM INSIDE
Ø1/8" BIT
Ø3.2mm
SCREW M4X10
AND CUPPED WASHERS.
SCREW
COVER CAPS
2A
2B
2C
1A
1B
1C
2A
Snap Screw Cover Caps (3) over screws and Cupped Washers.