Installation Guide

6
710286-100 Rev. A
4
OUTSIDE VIEW
2B1B
INSTALLING FRAME
2 PEOPLE REQUIRED
VIEW FROM INSIDE
1B and 2B Secure assembly to wall using previously drilled holes.
Fix e d Pa n e l
Ensure door assembly is centered in opening. Push down to
top of tub before anchoring screws to wall posts.
1A & 2A — Drill Pilot Holes
1B & 2B — Cupped Plastic Washer hold Cap in place
1C & 2C — Snap Cap in place
5
FIXING ASSEMBLY TO WALL POSTS
1 2
(NOTE: The Cupped Washers (23) hold Screw Cover Caps in place.)
1B
Screw M4x35
VIEW FROM INSIDE
Ø1/8" BIT
Ø3.2mm
SCREW M4X10
CAP
2A
2B
2C
1A
1B
1C
2B
Snap Screw Cover Caps (3) over screws and Cupped Washers.