Installation Guide

- 3 -
M985041 (3/20)
2
INSTALL SHOWER BAR
• Slide Escutcheon (1) and (2) onto the Shower Bar (5). Escutcheons must be slid all the way onto the bar so
that they are not obstructing the holes for SET SCREWS (6).
• Apply o-ring grease to the two o-rings on Adapter (3).
• Push and slide Shower Bar (5) onto Adapter (3) and (4).
• Tighten Set Screws (6) with provided Hex Wrench.
• Slide Escutcheon (1) against the wall.
• Escutcheon (2) is installed with DOUBLE SIDED TAPE (7). Remove the double sided tape backing then slide
and press ESCUTCHEON (2) against wall. Press rmly and hold for at least 30 seconds.
5
3
2
3
4
1
5
2
3
1
4
6
6
2
1
4
3
2A
4
2
1A1
24" (610 mm)
7
Center
Line
Center
Line