Specification

M39
© 2012 AS America Inc.
Revised 12/12
To Be Specied:
❏ Color: ❏ White
❏ Faucet*:
❏ Bracket Support: 485742-600 (2 required)
❏ Grid Drain:
❏ Drain:
❏ Trap: Plaster-Interceptor trap by others (space
must be left for removal of screens)
ALL PURPOSE/PLASTER
WORK SINK
VITREOUS CHINA
ALL PURPOSE/PLASTER WORK SINK
• Vitreouschina
• Highsplash-back
• Forwallhanger(included)orfor
exposed bracket support [381mm (15")
painted brackets available]
Single center faucet hole:
❏ 9061.250 All purpose sink
Faucet holes on 203mm (8") centers (Illus.):
❏ 9061.193Plasterworksink
Nominal Dimensions:
762 x 559mm
(30" x 22")
Available Components:
❏ 485742-600 .15 (381mm) painted pair of brackets
Compliance Certications -
Meets or Exceeds the Following Specications:
•ASMEA112.19.2forVitreousChinaFixtures
NOTES:
SHOWNWITHJ.R.SMITHNO.8715PLASTERINTERCEPTOR.
FITTINGSNOTINCLUDEDANDMUSTBEORDEREDSEPARATELY.
15"PAINTEDSUPPORTBRACKETS485742-600AVAILABLEANDMUST
BEORDEREDSEPARATELY.
PROVIDESUITABLEREINFORCEMENTFORALLWALLSUPPORTS.
IMPORTANT:Dimensionsofxturesarenominalandmayvarywithin
therangeoftolerancesestablishedbyANSIStandardA112.19.2.These
measurementsaresubjecttochangeorcancellation.Noresponsibilityis
assumedforuseofsupersededorvoidedpages.
356mm
(14")
1-1/2" O.D.
TAILPIECE
FINISHED FLOOR LINE
762mm
(30")
914mm
(36")
T-7F HANGER
559mm
(22")
203mm
(8")
241mm
(9-1/2")
152mm
(6")
559mm
(22")
381mm (15
"
)
PAINTED BRACKETS
(485742-600)
76mm
(3")
279mm
(11")
203mm
(8")
89mm
(3-1/2")
140mm
(5-1/2")
2" O.D. TUBING WASTE
FINISHED WALL LINE
889mm
(35")
343mm
(13-1/2")
260mm
(10-1/4")
419mm
(16-1/2")
333mm
(13-1/8")
102mm
(4")
2" O.D. TUBING
CLEANOUT CAP
J.R. SMITH #8715
PLASTER INTERCEPTOR
C/L of
2 O.D.
TUBING
WASTE
C/L OF 1/2" N.P.T.
SUPPLIES
C/L
* See faucet section for available models