Installation Guide

M965366 REV. 1.2 (12/14)
7
8
1
6
2
6
6" SHOWER DOOR HANDLE INSTALLATION
6
4
4
4
5
2
3
3
1
6
5
SHOWER
DOOR
SHOWER
DOOR
(2) 5/16" (8mm)
DIA. MOUNTING HOLES
LEVEL
C/L
Determine the desired height and location and mark a vertical centerline. Make sure the centerline is level.
Drill two 5/16" (8mm) diameter mounting holes through the shower door 6" (152.4mm) apart. Insert BOLTS (1), GASKETS (2),
INSERTS (3) and MOUNTING BRACKETS (4) on the inside of the shower door.
On the outside of the shower door, install GASKETS (2), MOUNTING BRACKETS (4) and HEX NUTS (5). Tighten HEX NUTS (5)
but do not over tighten.
Install SHOWER DOOR HANDLE (6) onto MOUNTING BRACKETS (4). Secure the DOOR HANDLE (6) with SET SCREWS (7) using
a 4mm HEX WRENCH (8).
6"
(152.4mm)
6"
(152.4mm)
3/16" - 3/8"
(4.8mm - 9.6mm)
2
2
4
7
Note: Professional installation is required for this product. The warranty does
not cover damage to the shower door due to improper installation.