Use and Care Manual

47 - EN
Symptom Cause Solution Page
Warm Air Does
Not Come Out
Seat sensor is not triggering. Sit on the SpaLet
®
seat.
21
Warm Air is Not
Warm
The warm air drying temperature is
not set to an appropriate tempera-
ture.
Set the warm air drying temperature
to an appropriate temperature.
10
Differences in temperature can be felt in accordance with usage condi-
tions. The air temperature is compliant with International Electrotechnical
Commission (IEC) standards.
-
Warm air stops
midway through
the process.
This function has been used for
more than 4 minutes.
Press the [Dryer] button again.
17
Warm Air Drying
Bowl Spray
Symptom Cause Solution Page
The bowl spray
function does not
operate.
The bowl spray function is set to
OFF.
Set the bowl spray function to ON.
13
H Function for
comfort enhancement
The bowl spray will not be activated
immediately after the user stands
up from the SpaLet seat.
Mist will not be sprayed if a person
sits on the SpaLet seat again within
approximately 80 seconds after
standing up from the SpaLet seat.
As long as the inside of the bowl
is wet, there still is an effect of the
bowl spray. There is no problem in
using the product.
13
Troubleshooting