Use and Care Manual
20 - EN
If the settings of this product have been changed using the operation as described in "Useful Functions", all settings can
always be reset to the default settings whenever desired.
Press and hold both the [Nozzle Position ] and [Power Save]
buttons for at least 2 seconds.
Restoring the Default Settings
â– Default settings
The following table lists the default settings.
Function Default Setting
Deodorizer Automatic deodorizing ON
Power Save
One-touch power save OFF
Advanced power save OFF
Water temp. Low
Seat temp. Low
Seat heater auto off OFF
Drying Startup air temperature Medium
Remote control operation sound ON
Intermittent nozzle drain OFF
Settings changes are stored and therefore not lost when the power plug is disconnected from the outlet or the power
switch is turned off.
Note that the one-touch power save settings are reset when the power plug is disconnected from the outlet.
(
+
Page 18)
Storing Settings Changes
[Nozzle Position ] + [Power Save]