Use and Care Manual

18 - EN
Power Save
The power save function includes the one-touch power save (8 hours) option and the advanced power save (always on)
option. Using one-touch power save together with advanced power save is even more effective at reducing energy con-
sumption. This function is turned off by default.
One-touch Power Save (8 Hours)
Press this switch when the SpaLet
®
seat will not be used for an extended period of time, such as at night, to turn off the
SpaLet seat heater for 8 hours and reduce power consumption. The previous settings will be restored after 8 hours elapse.
* The one-touch power save option
can be activated twice per day.
* Once 8 hours elapse, the previ-
ous settings are automatically
restored, and the Power Save
indicator begins to ash.
(Reference)
● T he one-touch power save setting would be back to default setting after power outage or when the power plug has been discon-
nected from the outlet.
(Reference)
● When the power save function is activated, the seat temperature is lowered, which may feel cool to the touch. In
this case, cancel the power save function.
● Leaving the seat lid closed is still an effective way to conserve power when the power save function is turned off.
Standby 8 hours
Power save indicator
Off OnOn Flashes
SEAT TEMP.
Set
Restoration
8:00 10:00 10:0012:00 14:00 16:00 18:00 20:00
OFF
Temperature
Setting
Power Save
Temperature
* When used in combination with
the one-touch power save option,
the Power Save indicator on the
LCD turns on while the one-touch
power save option is in effect for 8
hours. The Power Save indicator
ashes twice during the 16 hours
of one-touch power save standby.
● Seat unit indicator section
(ashes twice)
● Press the [Power Save] button.
* Each pressing of the [Power Save] button toggles
between the power-saving modes.
* The Power Save indicator in the LCD turns on when
the function is enabled.
●
Seat unit indicator section
Power save
indicator
Power save
indicator
Advanced Power Save (Always On)
This function lowers the water temperature when the SpaLet seat is not in use to reduce power consumption.
* Power is saved at all times while the SpaLet seat is not in use.
Flashes twiceOff
Set
SEAT TEMP.
OFF
Temperature
Setting
Power Save
Temperature
Power save indicator
In use
Restoration
Power Save
● Press and hold both the [Nozzle
Cleaning] and [Power Save]
buttons for at least 2 seconds.
* The power saving mode is changed each time the
[Power Save] and [Nozzle Cleaning] buttons are
both pressed and held for at least 2 seconds.
* The Power Save indicator in the LCD ashes when
the function is enabled.
[Nozzle Cleaning] + [Power Save]
[Power Save]