Use and Care Manual

17 - EN
Warm Air Dryer
Warm Air Drying
Warm air is blown to dry the area washed by the nozzle spray.
* The front cleansing nozzle extends and pushes the nozzle shutter down
during the warm air drying operation.
Be sure to set the drying tempera-
ture to the "Low" setting when
the SpaLet
®
seat will be used by
the following types of users.
Children
Elderly persons
Persons with illness
Persons with limited mobility
Persons with sensitive skin
Persons who are taking medication that
causes drowsiness
Persons who are under the inu-
ence of alcohol
Persons who are su󰀨ering from
exhaustion
* Using the dryer for an extended period of
time at some other setting may result in
burns.
WARNING
(Reference)
After cleansing, you can dry faster by wiping gen-
tly with toilet paper to remove water drops before
pressing the [Dryer] button.
Warm air drying
This SpaLet seat is equipped with an auto-stop function
so that operation stops automatically after 4 minutes.
Press the [Dryer] button.
* There are three levels of air temperature available.
* The deodorizer function stops temporarily during
the drying operation.
Press the [Stop] button
to stop operation.
STEP
4
Changing Air Temperature
Press the [Dryer] button again while drying.
* Every time the button is pressed, the air temperature and indicator LED will make a level change from
Medium to High, High to Low, and back to Medium again.
* The indicator LED will be off in several seconds.
* When the dryer is stopped, the setting will return to the initial setting.
General Operation
Dryer
Medium
Dryer
High
Dryer
Low