Instructions / Assembly

10 - EN
Preparation and Checks Before Use
● Changethetemperature
* Press the corresponding switch to change the dif-
ferent temperatures.
Adjust the Temperature
(Reference)
• The SpaLet seat does not warm immediately. The
seat heater should be turned on 10 to 15 minutes
before use to ensure the desired temperature is
reached for comfortable use.
• This SpaLet seat is equipped with a seat heater
auto off function that automatically turns off the seat
heater when the SpaLet seat is in use to prevent low-
temperature burns. (
+
Page 19)
• The maximum seat temperature is 96.8°F for energy-
saving purposes. The seat may feel cool depending
on the usage environment.
Be sure to set the seat temperature
to the "OFF" setting when the SpaL-
et
®
seat will be used by the following
types of users.
• Children
• Elderly persons
• Persons with illness
• Persons with limited mobility
• Persons with sensitive skin
• Persons who are taking medication that
causes drowsiness
• Persons who are under the inuence
of alcohol
• Persons who are suffering from exhaustion
* Using the SpaLet seat for an extended
period of time without turning off the seat
heater may result in low-temperature
burns.
OBSERVE
WARNING
Seat Temp.
* There are 6 levels of seat temperature available including "Off",
"Low (approximately 82.4°F)", "High (approximately (96.8°F)",
and the other levels between low and high. Select your tem-
perature preference in accordance with the season.
Water Temp.
* There are 6 levels of water temperature available including
"Off", "Low (approximately 89.6 ° F)", "High (approximately
104 ° F)", and the other levels between low and high. Select
your temperature preference in accordance with the season.
Dryer Temp.
* There are 3 levels of drying temperature available including
"Low", "Medium", and "High". (
+
Page 17)
STEP
4
About Indicators
All indicator LEDs will be off if the button is left
unoperated for several seconds. If the indicator LEDs
are off while making settings, press the button again.