Installation Instructions

-17 - EN-
Adjusts the water
pressure during rear
and front cleansing.
SPRAY STRENGHT
Stops rear cleansing,
front cleansingand
drying operations.
STOP
Conserves energy by
lowering the toilet seat
temperature.
POWER SAVE
Adjusts the toilet seat
temperature.
SEAT TEMP.
Controls the power
for the seat.
POWER
Adjusts the temperature of
the front and rear cleansing
water.
WATER TEMP.
Dries the user after
cleansing.
DRYER
When pressed during
rear cleansing,
provides a massage
effect by alternating
the spray strength
between high
and low.
PULSATING
Power plug
*Due to the seat sensor function, the product’s
back cleansing, front cleansing and deodorizer
will not operate unless you touch the seat.
Seat sensor switch
Adjusts the water
pressure during rear
and front cleansing.
SPRAY STRENGHT
Stops rear cleansing,
front cleansingand
drying operations.
STOP
Conserves energy by
lowering the toilet seat
temperature.
POWER SAVE
Adjusts the toilet seat
temperature.
SEAT TEMP.
Controls the power
for the seat.
POWER
Adjusts the temperature of
the front and rear cleansing
water.
WATER TEMP.
Dries the user after
cleansing.
DRYER
When pressed during
rear cleansing,
provides a massage
effect by alternating
the spray strength
between high
and low.
PULSATING
Power plug
*Due to the seat sensor function, the product’s
back cleansing, front cleansing and deodorizer
will not operate unless you touch the seat.
Seat sensor switch
CAUTION
When removing the filter, be sure to
close the water shut-off valve. When
attaching the filter, firmly tighten it
until the end of the filter is hidden in
the SpaLet seat unit.
* Water will leak from the filter.
Confirm that the power LED on the SpaLet
®
seat unit is lit.
1. Insert the power plug into the outlet.
2.Check the front and
back cleansing spray.
Test Operation
Follow the procedure below after the installation work
has been completed.
(1) Check the cleansing operation.
1) With your forearm resting on the
SpaLet seat, press the Cleansing
button.
The spray automatically stops two
minutes after the switch is turned on.
2) When the nozzle extends, cover the
tip of the nozzle with your hand to
catch the spray.
3) Press the [Stop] button to stop the
cleansing spray.
(2) Perform the same check using the
front cleansing spray function.
Filter
End
Power save indicator
Power indicator