Installation Instructions

-13 - EN-
Seat mounting bolts
Rounded packing
Existing seat
Slip washer
Nut
Loosen
Bushings
Seat mounting
holes
1
CAUTION
•When installing the SpaLet
seat, make sure to use the
parts provided in the
installation kit.
Installation diagram
SpaLet seat
Toilet seat mounting guide holes
Mounting plate
Bushing
Mounting brackets
Washer
Seat mounting bolts
Mounting bolts for the SpaLet seat
Mounting
brackets
Mounting
plate
2
Mounting plate
SpaLet seat
Washer
4. Installation of the SpaLet
®
seat
(1) Remove the existing
seat.
1) Remove the nuts from
the seat mounting bolts,
the slip washers, and
rounded packing.
2) Raise the seat and
remove it by lifting the
seat mounting bolts.
References
• Some toilet seats may
require different methods of
removal that differ from our
example.
• The removed toilet seat
should be stored in your
home in case you remove
the SpaLet seat.
1) Insert the bushings
into the seat mounting
holes.
2) Insert the mounting
bracket into the
mounting plate and
use the mounting bolts
to attach the slide
plate to the toilet bowl.
(2) Install the slide plate onto the toilet bowl.
1) Place the SpaLet seat on the toilet bowl and
align the mark on the mounting plate with the
mark on the rear section of the SpaLet seat.
2) Slightly raise the front side of the SpaLet seat,
slide it until the slide plate is fully inserted,
and then press the locking lever to secure the
SpaLet seat.
(3) Install the SpaLet seat.