Installation Guide

35 - EN -
Specifications
Product Type Remote Control
Product code 8012A60GRC-020
Rated Voltage AC120V 60Hz
Rated Power 1300W
Inlet Water
Pressure Range
Min. 9 psi (0.06MPa) Flow pressure
Max. 108 psi (0.75MPa) Hydrostatic pressure
Ambient Temperature Range 32°F~104°F (0°C~40°C)
Product Dimension
L 21-1/8" x W 17-3/16" x H 5-1/2"
(L 536mm*W 432mm*H 140mm)
Water Inlet Type Direct inlet flow
Cleansing
Heating Type Instant heating
Rear Cleansing Volume
0.74~1.05 pint/min (0.35~0.5L/min)
(6 adjustment levels)
water pressure 29psi (0.2 Mpa)
Front Cleansing Volume
0.74~1.05 pint/min (0.35~0.5L/min)
(6 adjustment levels)
water pressure 29psi (0.2 Mpa)
Water Temperature
OFF (Water temperature) Low-about 90°F (32°C); Relatively Low-about 93°F
(34°C); Mid-about 97°F (36°C); Relatively High-about 100°F (38°C); High-about
104°F (40°C)(6 adjustment levels)
One Touch Cleansing
-
Oscillating
•
Massage
•
(Back cleansing only)
Nozzle Position
Adjustment
•
Heating Power 1200W±10%
Safety Device Temperature sensor, temperature fuse, tilt sensor, float switch
Remote
Dimension
L263mm*W32.5mm*H71mm
L10-3/8"*W1-1/4"*H2-13/16"
Power Source 2*1.5V AAA batteries
Heated
Seat
Surface Temperature Room temperature/ about 82°F - 104°F (28°C - 40°C) 5 adjustable levels
Heating Power 57W±10%
Safety Device Temperature sensor, fuse
Dryer
Air volume 0.2 m/min
Warm air temperature Approximately 104°F (40°C) - 131°F
（
55°C) (3 adjustable levels)
Safety device Temperature fuse
Deodorizer
Deodorizing Method Absorption by activated carbon deodorizer
Deodorizing performance Auto Deodorizing : 3.8CFM (0.11m/min)
Power
Saving
One Touch Power Saving
•
(8hr)
Super Power Saving
•
Other
Convinient
Functions
Self Cleaning Nozzle
•
Nozzle Manual Clean
•
Nozzle Shutter
•
Seat Heating Auto Off
•
Sitting Sensor
Mechanical sensor
Anti-microbial Material
Seat(SIAA), lid, nozzle, remote control panel
Soft Close Seat & Cover
•
Quick Detach Cover
•
Quick Detach Main Body
•