Installation Guide

13 - EN -
4. Installation of the SpaLet
®
seat
(1) Remove the existing seat.
1) Remove the nuts from the seat
mounting bolts, the slip washers,
and rounded packing.
2) Raise the seat and remove it by
lifting the seat mounting bolts.
References
• Some toilet seats may require
different methods of removal that
differ from our explanation.
1) Insert the bushings into
the seat mounting holes.
2) Insert the mounting
bracket into the mounting
plate and use the
mounting bolts to attach
the mounting plate to the
seat.
(2) Install the mounting plate onto the toilet.
1) Place the SpaLet
®
seat on the toilet and align the seat
to the mounting plate.
2) Slightly raise the front side of the SpaLet
®
seat, slide
it until the mounting plate is fully inserted, and then
press the locking lever to secure the SpaLet
®
seat.
(3) Install the SpaLet
®
seat.
Body
mounting
bolt
Mounting
plate
Bushing
Bracket
Seat
mounting hole
SpaLet
®
seat
Installation
Figure
Seat mounting bolts
Rounded packing
Existing seat
Slip washer
Nut
Loosen
Bushings
Seat mounting
holes
Mounting bolts
for the toilet
Mounting
brackets
Mounting plate
Center aligned