Installation Guide

13
4. Installation of the bidet
(1) Remove the existing seat.
1) Remove the nuts from the seat
mounting bolts, the slip washers,
and rounded packing.
2) Raise the seat and remove it by
lifting the seat mounting bolts.
References
•Sometoiletseatsmayrequire
different methods of removal that
differ from our explanation.
1) Insert the bushings into
the seat mounting holes.
2) Insert the mounting
bracket into the mounting
plate and use the mounting
bolts to attach the slide
plate to the seat.
(2) Install the slide plate onto the seat.
1) Place the bidet on the toilet and align the seat to the
mounting plate.
2) Slightly raise the front side of the bidet, slide it until the
slide plate is fully inserted, and then press the locking
lever to secure the bidet.
(3) Install the bidet.
Body
mounting
bolt
Mounting
plate
Bushing
Bracket
Seat
mounting hole
E-bidet
Installation
Figure
Seat mounting bolts
Rounded packing
Existing seat
Slip washer
Nut
Loosen
Bushings
Seat mounting
holes
Mounting bolts
for the toilet
Mounting
brackets
Mounting plate
Center aligned