FAQ

©2018 AS Americas, Inc. 3
Functions and Features (continued)
What is Oscillation?
Oscillation spray moves the nozzles forwards & backwards continuously allowing for a wider area
to be cleansed.
What is the temperature of the heated seat?
 DependingontheuseoftheECOmode,thetemperatureoftheseatcanvary.IfHighEciencyPower
Savings is being used the seat will be at room temperature and begin to power up only after the user
initiatesusingthebidetseat.DuringregularusewithorwithECOmodethetemperaturerangesfrom
approx.82°F–104°F(approx.28°C–40°C)  
What is the temperature of the water?
The water temperature has a range of :
 •OFF(Watertemperature)          
 •Low-about90°F(32°C)          
 •Mid-about97°F(36°C)        
 •High-about104°F(40°C)
Does this have an automatic seat? Slow close seat?
The Advanced Clean SpaLet® bidet seat does have a slow-close seat and lid for user convenience but
does not have an automatic open/close lid.
How does the bidet work?
The user must sit on the seat to depress the seat sensor to allow the bidet functions to work. Then with the
touch of a button, the self-cleaning nozzles extend from behind the nozzle shutter, under the seat to deliver
soothing warm water for cleansing.
How long does the heated seat stay warm?
You can set the seat to be warm all the time by NOT using the ECO function. If you use the eco power
savingmodeitshutsthewaterandseatheaterofor8hoursthenrestoresthepower.IfHighEciency
Power savings is used it turns the water and seat heater o until the product is back in use.
Explain the eco function, how does it work?
It reduces power consumption by turning o the water and seat heater for 8 hours. The power settings are
automatically restored after 8 hours. To use this feature press the ECO button on the remote or side panel.
ThereisalsoasecondaryHighEciencyPowerSavingsthatshutsthewaterandseatheaterobetween
uses by pressing the water temp & power savings buttons for 2 seconds or more; a light indicator flashes
once activated.
How much electricity does this consume?
The Advanced Clean® 1.0 and 2.0 has a rated power consumption of 300W +/- 10%.
How does the heated water supply work, where do I get the warm water from?
The Advanced Clean® has a water heating element and a tank reservoir. That means you install the seat to
the toilet, connect the water supply line and the seat does the work to heat the water and keep it warm in
the reservoir. This cycle is repeated as the bidet seat is used.
How long does the heated water last for?
This product uses a warm water reservoir which holds 0.6 L of water which is estimated around
35 seconds of operation. Consistent use beyond the original 35 seconds will have dimished heat as cold
waterrellsthetankreservoir.Theseatwillneedtimetoreheatthewater~10minutesifallwarmwater
is completely consumed.
Where does the water come from that the bidet function uses?
The clean water comes from the incoming water supply line. Tank water is NOT used for the bidet function.
(Continued on next page)