Installation Guide

8
1
2
1
Refilling Soap:
• Refill the soap bottle when the soap reaches
20 mm from the bottom of the bottle. Do not
let it completely deplete.
• Press the BUTTON (1) to unlock the soap
bottle.
Note: Hold the soap bottle when unlocking it
as the soap bottle detaches quickly.
• Clean the soap bottle periodically with water
to prevent buildup.
• Do not use abrasive soaps with particles as
this can lead to clogs.
• Push the refilled soap bottle back in to the
locking mechanism.
Recommended Soap:
• Clean Revolution
®
Foaming Hand Soap
• Foam Soap with 1-20 cps Viscosity Range
SERVICE AND MAINTENANCE (CONTINUED)
A
• Replace the batteries when a light in the sensor
window blinks.
• Unscrew the SCREWS (1) on the battery pack.
• Insert four BATTERIES (2) and reinstall the battery
pack cover.
For DC powered Soap Dispensers
only.
Replacing Batteries: