Installation Guide

3
4
INSTALL CONTROL BOX
INSTALL BATTERY PACK
A E
• Insert the CONTROL BOX (1) in to the CONTROL
BOX PENDANT (2).
• Unscrew the SCREWS (1) on the battery pack.
• Insert four BATTERIES (2) and reinstall the battery
pack cover.
• Drill holes in the wall under the sink 162 mm apart.
NOTE: the battery pack can be used as a hole
template.
NOTE: Recommended height is 350 mm above
the floor.
• OPTIONAL: Use DRY WALL ANCHORS (3) if
applicable.
• Thread the SCREWS (1) through the battery pack
and in to the wall to secure it.
For DC powered Soap Dispensers
only.
1
2
162 mm
1
1
2
3