Installation Guide
6
TEST INSTALLED FITTING FOR LEAKS
• Remove AERATOR (1) with supplied aerator key.
With handles in OFF position, turn on water supplies
and check all connections for leaks.
• Operate both handles to flush water lines thoroughly.
• Rotate spout from left to right and check for leaks.
“P” TRAP
1
WASTE
OUTLET
7
SERVICE
• Aerator may accumulate dirt and debris causing reduce flow. Unthread the aerator with supplied aerator key
and flush the water lines. Clean and reinstall the aerator.
• To remove the drain stopper for cleaning, rotate counterclockwise and lift up.