Specifications

AC VERSIONS (HARDWIRE / PLUG-IN);
Fig. 2
3
M965654 Rev. 1.2 (2/15)
BLACK & WHITE
POWER
CONNECTIONS
10' EXTENSION
WALL
OUTLET
7
CONNECTOR NOT
USED IN THIS
INSTALLATION
7
6
4" ELECTRICAL BOX
OR EQUIVALENT BY
OTHERS (6)
Fig. 1
Fig. 2
1
3
2
3
4
4
3
4
2
1
5
Important: All product with Standard Battery come
with electrical connections preaseambled (at the
factory). No further action necessary.
1. Connect LONG LIFE POWER PACK (1) to SENSOR
CABLE (2).
2. Secure the connections by installing into CONNECTOR
HOUSING (3) as shown. Rotate the END CAPS (4) to
secure the connection within the CONNECTOR
HOUSING (3).
NOTE: The LONG LIFE POWER PACK (1) will hang
underneath the countertop/sink. Connection is
secured by CONNECTOR HOUSING (3).
1. Connect PLUG-IN POWER SUPPLY (1) or 10' EXTENSION (2)
if using HARDWIRE POWER SUPPLY (7) to single
terminal of Y-ADAPTER (3).
2. Connect SENSOR CABLE (4) to either of the available
terminals of the Y-ADAPTER (3).
3. Connect PLUG-IN POWER SUPPLY (5) to wall outlet,
or connect other end of 10' EXTENSION (2) to the
HARDWIRE POWER SUPPLY (7).
4. Contractor to supply ELECTRICAL BOX (6).
5. Connect White and Black power connections to
POWER SUPPLY (7). Mount POWER SUPPLY (7) into
ELECTRICAL BOX (6).
DC VERSIONS (LONG LIFE POWER
PACK & STANDARD BATTERY; Fig. 1
Product Page
DC Long Life Power Pack
(
7053. Series)
3
DC Standard Battery
(
7055. Series)
3
AC Plug-in
(7056. Series)
3
AC Hardwire
(
7059. Series)
3
AC Multi Hook-up
(
7057. Series)
4
A
ELECTRICAL INSTALLATION
B
LONG LIFE POWER PACK VERSION;
FOR HARDWIRE VERSION;
Important: Turn off power to outlet or electrical box.
CAUTION: Use only American Standard supplied
transformers and cable sets. Using non-AS
supplied cables, or cutting, splicing or modifying
any components will void the warranty.