Installation Guide

4
INSTALL DRAIN
• Insert DRAIN (1) through the sink basin.
• Slide RUBBER GASKET (2) on to DRAIN (1)
against the bottom of the sink basin.
• Secure RUBBER GASKET (2) by threading
NUT (3) on to DRAIN (1).
1
3
2
6
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH. DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH
CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
5
ADJUST HOT LIMIT SAFETY STOP
Note: This step is optional and only applicable to
models with the water mixing handle.
• Remove Set Screw (1).
• Slide Handle (2) off of Adapter (4).
• Unthread Screw (3).
• Remove Adapter (4) and replace with the
Hot-Limit Adapter (5.)
• Reinstall Screw (3), Handle (2), and Set Screw (1).
5
2
4
3
1