Installation Guide

INSTALLATION INSTRUCTIONS
1A 1B
• Insert Supply Lines, Power Chord, and Mounting
Shank through the counter top.
• Push WASHER (2) on to MOUNTING SHANK (3).
• Thread NUT (1) on to MOUTNING SHANK (3).
• Ensure that O-RING (4) is properly seated
between the faucet base and the counter top
before tightening NUT (1).
INSTALL WITH ESCUTCHEON
INSTALL WITHOUT ESCUTCHEON
A A
Turn off hot and cold water
supplies before beginning.
SINK OR
MOUNTING
SURFACE
PUTTY
3
1
2
FAUCET
BASE
5
4
SINK OR
MOUNTING
SURFACE
3
1
2
FAUCET
BASE
4
• Insert Supply Line(s), Power Chord, and Mounting
Shank through ESCUTCHEON (5) and the
counter top.
• Push WASHER (2) on to MOUNTING SHANK (3).
• Thread NUT (1) on to MOUNTING SHNAK (3).
• Ensure that O-RING (4) is properly seated between
the faucet base and the ESCUTCHEON (5) before
tightening NUT (1).
Turn off hot and cold water
supplies before beginning.