Spec Sheet

L89
© 2012 AS America Inc.
3/12
MONTERREY
™
0.35 GPM
TWO-HANDLE 8" WIDESPREAD LAVATORY FAUCET
WITH RIGID/SWIVEL SPOUT
GENERAL DESCRIPTION:
Durable cast brass construction. Cast brass valve bodies with
8" rigid copper connection with compression fittings. 1/2" male
threaded inlet shanks with brass coupling nuts. 1/4 turn ceramic
disc valve cartridges. Field-convertible rigid/swivel gooseneck
spout. Vandal-Resistant Wrist Blade handles with blue & red
color indexes. 0.35 gpm/1.3L/min. maximum flow rate.
PRODUCT FEATURES:
Meets CALGreen: 0.35 gpm/1.3 L/min. flow rate
Pressure Compensating Spray: Provides a constant
water flow of 0.35 gpm throughout the pressure range.
Solid Brass Construction: Durable - Excellent in high
use applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Field-Convertible Rigid/Swivel Spout: Easily converted
in the field.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
MODEL NUMBER:
6540.174 Widespread Lavatory
0.35 gpm Pressure Compensating, Vandal-Resistant
Non-Aerated Spray. Rigid/swivel gooseneck spout.
Vandal-Resistant Wrist Blade Handles. Less drain
and pop-up hole.
SUGGESTED SPECIFICATION:
Two handle widespread lavatory faucet shall feature cast brass valve bodies with 8" rigid copper connection. Shall feature
water-conserving, pressure compensating vandal-resistant 0.35 gpm/1.9L/min. non-aerated spray. Vandal-Resistant Wrist
Blade handles. Shall also feature 1/4 turn washerless ceramic disc valve cartridges. Shall also feature field-convertible
rigid/swivel gooseneck spout. Fitting shall be American Standard Model # 6540.174.002.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9 and Annex G
CALGreen
6540.174
Product
Number
Description
Widespread Lavatory with field-convertible rigid/swivel gooseneck spout. 0.35 gpm/1.3L/min.
compensating, vandal-resistant non-aerated spray. Vandal-Resistant Wrist Blade Handles. Less
drain and pop-up hole.
Finish
Polished
Chrome
002
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND
USABLE BUILDING FACILITIES-CHECK LOCAL CODES
35mm
(1-3/8") DIA.
MOUNTING
HOLES
1/2" NPSM
38mm
(1-1/2") MAX.
203mm
(8")
400mm
(15-3/4")
98mm
(3-7/8")
165mm
(6-1/2")
127mm
(5")
270mm
(10-5/8")
89mm
(3-1/2")
51mm
(2") DIA.
TYP.
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.1
0.2
0.3
0.4
80604020