Installations & Assembly

9
M965652 Rev. 1.7 (10/16)
Fig. 4
CR-P2
6
3
2
STANDARD
BATTERY
PWRX
4
1
5
2
3
Fig.5
1
Fig.5
D
INSTALL / REPLACE THE BATTERY
or PWRX; Fig. 4
1. RemoveCOVERfromCONTROLBOX(1).
2.DisconnectBATTERYHOLDER(3)from27"
EXTENSIONCABLE(5).
3.RemoveoldBATTERYfromBatteryHolder(3). Install new
BATTERY(2) making sure the terminal side is inserted rst
andshapeofthebatteryfollowstheshapeoftheBATTERY
HOLDER (3).
4.ToreplacePWRXBATTERYPACK (4), unplug and replace
with new Power Pack.
5.ReconnectBATTERYHOLDER(3) to 27"EXTENSION
CABLE (5).
6.ReinstallCONTROLBOXTCOVER.Tightencover
screws rmly.
E
CLEAN AND REMOVE THE AERATOR; Fig. 5
1. RemoveAERATORHOUSING(1)withKEYsupplied
withfaucet.
2.RemoveAERATOR (2)fromHOUSING(1).
3.CleantheAERATORSCREENS (3).
4. Clean with water. Reassemble and install into spout end.
Make sure black seal washer is in place..