Installation Guide

9
M965651 Rev. 2.0 (3/19)
© 2019 AS America Inc.
Fig. 4
CR-P2
6
3
2
STANDARD
BATTERY
PWRX
4
1
5
1
2
3
4
Fig.5
Fig.5a
PULL UP TO
REMOVE SPOUT
3
6
4
5
D
INSTALL / REPLACE THE BATTERY or
PWRX BATTERY PACK; Fig. 4
1. Remove CONTROL BOX COVER (1).
2. Disconnect Battery Holder (3) from CABLE (5).
3. Remove old BATTERY from Battery Holder (3). Install new
BATTERY (2) making sure the terminal side is inserted rst
and shape of the battery follows the shape of the BATTERY
HOLDER (3).
4. Reconnect BATTERY HOLDER (3) to CABLE (5).
5. To replace PWRX BATTERY PACK (4), unplug and
replace with new Power Pack.
6. Reinstall CONTROL BOX COVER. Tighten cover
screws rmly.
E
CLEAN AND REMOVE FLOW RESTRICTOR;
Fig. 5
1. Remove SET SCREW (1) with FLAT BLADE
SCREWDRIVER (2). Pull off SPOUT (3) from faucet
base. Fig. 5.
2. Remove HOUSING (4) and remove FLOW
RESTRICTOR (5). Fig. 5a.
3. Clean FLOW RESTRICTOR (5). Reassemble and
install into SPOUT BASE (6). Reassemble
SPOUT (3) onto SPOUT BASE (6) and tighten
SET SCREW (1). Fig. 5.