Installation Guide
5
M965651 Rev. 1.5 (10/16)
Fig. 1a
Fig. 1b
Fig. 1
2
3
1
4
5
INSTALL BATTERY
CR-P2
5a
5
Fig. 1c
7
2
STANDARD
BATTERY
PWRX
5a
5a
6
STANDARD
BATTERY
PWRX
Fig. 1d
5a
ELECTRICAL INSTALLATION
Product Page
Plug-In AC Power Kit (PK00.PAC)
6
Hard-Wired AC Power Kit (PK00.HAC)
6
Multi-AC Power Kit (PK00.MAC)
7
A
DC VERSIONS ; Fig. 1
• PWRX
• STANDARD BATTERY
1. RemoveCONTROLBOXCOVER (1). Fig. 1.
2. Feedthe27"EXTENSIONCABLES (2) through the top of
CONTROLBOX (3). Fig. 1a.
FOR STANDARD BATTERY VERSION ONLY
3.InsertBATTERY(4) intoBATTERYHOLDER (5),
makesuretheshapeoftheBATTERY(4) follows the
shapeoftheBATTERYHOLDER(5) and terminal end
is inserted rst. Fig. 1b.
4.InserttheBATTERYCONNECTOR(5a) from the
StandardBatteryorPWRXBATTERYPACKthroughside
GROMMET(6) as shown. Fig. 1c.
5. ConnectSOLENOIDCABLE(7)andBATTERY
CONNECTOR(5a)to27"EXTENSIONCABLES (2).
PlaceStandardBatteryorPWRXBATTERYPACKinto
housing. Fig. 1d.
6. Reinstall CONTROLBOXCOVER(1). Tighten cover
screws rmly.
CAUTION: Use only American Standard supplied cable sets.
Using non-AS supplied cables, or cutting, splicing or modifying
any components will void the warranty.