Warranty

The hinge cap covers are designed to snap
lock on to the hinge. Position the hinge
covers and push down on the cover.
Tighten the bolts using a screwdriver.
Side view of the toilet seat installation parts.
Bowl
1
2
3
4
5
6
7
Under Hinge
Base
Hinge
Gasket
Bowl
Bowl
Bowl
Slot
Alignment
Tab
Attach hinge gaskets to bottom of hinge base.
Make sure alignment tabs on hinge gaskets
match the slots under the hinge base.
Align hinges over holes on toilet bowl.
When the seat is properly aligned with the
front edge of the bowl, slip the bolt through
the washer and the bowl bolt holes.
When closed nuts lock
onto threads allowing
final tightening with
screwdriver or supplied
attachment handles.
When opened, nuts can slip over
threads for rapid installation.
The installation kit includes two sets of stainless
washers: 2 with center holes and 2 with offset
holes. The offset washers hole can be set
forward or back allowing the seat to be moved
back from or to the forward edge of the bowl rim.
FRONT OF BOWL
TANK
To Move
Seat Forward
To Move
Seat Back
Page 3
7302106-100 Rev. D 7/15
Zip nuts - See below
8
9
10
REMOVAL REMOVAL REMOVAL
INSTALLATION #3 - BOTTOM MOUNT WITH ZIP NUTS