Technical Data
CADET™ BIDET
VITREOUS CHINA
CADET BIDET
❏ 5023.100 For deck-mounted fitting
• Vitreous china
• Flushing rim and vertical cleansing spray
• Integral overflow
• Two (2) bolt caps
• Shown with 3410.310 Cadet bidet fitting with
clear acrylic handles (not included)
Nominal Dimensions:
654 x 381 x 368mm
(25-3/4" x 15" x 14-1/2")
Fixture Dimensions conform to ANSI Standard
A112.19.2
To Be Specified
❏ Color:
❏ Bidet Fitting*:
❏ Fitting Finish:
❏ Trap:
❏ Supplies with Stops:
* See faucet section for additional models available
654mm
(25-3/4)
368mm
(14-1/2)
FINISHED
FLOOR
203mm
(8)
FINISHED
WALL
64mm
(2-1/2)
C/L (2) 13mm (1/2) DIA. HOLES
ON 191mm (7-1/2) CENTERS
1-1/4 O.D. TAILPIECE
SUPPLIES
AS REQ'D
229mm
(9)
COUPLING NUT
ON FITTING
133mm
(5-1/4)
102mm
(4)
102mm
(4)
381 mm
(15)
121mm
(4-3/4)
159mm
(6-1/4)
76mm
(3)
MIN.
64mm
(2-1/2)
MIN.
C/L HOT & COLD SUPPLY INLETS
C/L OF OUTLET
C/L OF SPRAY
127mm
(5)
114mm
(4-1/2)
VACUUM
BREAKER
●
●
*
© 1995 American Standard Inc.
TBU-007A
SPS 5023
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES ARE SUGGESTED.
BIDET FITTING HAS TRANSFER VALVE FEATURE.
“P” TRAP AND FITTINGS NOT FURNISHED WITH BIDET AND MUST BE
ORDERED SEPARATELY.
PROVISIONS MUST BE MADE FOR THE INSTALLATION OF TRAP IN FLOOR.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH FITTING.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaflet.
*
●