Dimensions Guide

H137

Revised 3/02

ALCOVE SHOWER BASE

Product Features:

• Acrylic with berglass reinforcement

• Single threshold unit

• Textured bottom pattern

• Integral self-leveling base

• Integral three-sided, double tiling edge

with water retention ange

• Molded-in ood guard

• PVC shower drain with stainless steel

drain plate

❏ 6034.ST ALCOVE SHOWER BASE

Nominal Dimensions:

1527 x 867 x 168mm

(60-1/8" x 34-1/8" x 6-5/8")

❏ 4834.ST ALCOVE SHOWER BASE

Nominal Dimensions:

1222 x 870 x 168mm

(48-1/8" x 34-1/4" x 6-5/8")

Compliance Certications -

Meets or Exceeds the Following Specications:

• ANSI Z124.2 for Plastic Shower

• ASTM E162 for Surface Flammability

• NFPA 258 for Smoke Density

To Be Specied - Required:

❏ Color: (specify American Standard xture color)

To Be Specied - Optional:

❏ Metal Drain Plate:

 ❏ 751819-099 in Polished Brass

 ❏ 751819-295 in Satin Nickel

ALCOVE

SHOWER BASE

HIGH GLOSS ACRYLIC

NOTES:

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH SHOWER

BASE FOR ADDITIONAL INFORMATION.

IMPORTANT: Dimensions of xtures are nominal and may vary within the

range of tolerances established by ANSI Standard Z124.1 / CSA. These

measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided pages.

SEE REVERSE SIDE FOR ROUGHING-IN DIMENSIONS

AND PRODUCT SPECIFICATIONS

PAGE 1
ALCOVE SHOWER BASE HIGH GLOSS ACRYLIC ALCOVE SHOWER BASE Product Features: • Acrylic with fiberglass reinforcement • Single threshold unit • Textured bottom pattern • Integral self-leveling base • Integral three-sided, double tiling edge with water retention flange • Molded-in flood guard • PVC shower drain with stainless steel drain plate ❏ 6034.ST ALCOVE SHOWER BASE Nominal Dimensions: 1527 x 867 x 168mm (60-1/8" x 34-1/8" x 6-5/8") ❏ 4834.
PAGE 2
ALCOVE SHOWER BASE HIGH GLOSS ACRYLIC 6034.ST 4834.ST 83mm (3-1/4") DIA. OUTLET 870mm (34-1/4") 425mm (16-3/4") 867mm (34-1/8") 83mm (3-1/4") DIA. OUTLET 425mm (16-3/4") SKID RESISTANT SURFACE SKID RESISTANT SURFACE 611mm (24-1/16") 762mm (30") 1222mm (48-1/8") 1527mm (60-1/8") 143mm (5-5/8") NOM. ROUGH FLOOR INTEGRAL TILING FLANGE ROUGH FLOOR 168mm NOM. (6-5/8") 143mm (5-5/8") NOM. INTEGRAL TILING FLANGE 168mm NOM. (6-5/8") GENERAL SPECIFICATIONS FOR 6034.