Installation Instructions

pg5
WARNING: Overtightening of water supply line nuts could result in breakage and potential
flooding. If the connection leaks after hand tightening, replace the supply line. Do not use any
type of sealant on the water supply connection. Use of plumber’s putty, pipe dope, or any other type of
sealant will void the warranty.
!
!
ADVERTENCIA: Si aprieta demasiado las tuercas de la tubería que suministra agua, puede
provocar una rotura y causar una inundación. Si la conexión tiene una fuga después de apretar
todo a mano, reemplace el tubo de suministro de agua. No utilice ninguna clase de sellador en
la conexión de la tubería. El uso de masilla de plomería, lubricante o cualquier otra clase de sellador
invalidará la garantía.
For seat installation, see instructions included with seat.
Para instalar el asiento, revise las instrucciones incluidas con el asiento.
*
*
8
7
6
NOTE: To ease installation, push
down on the top of the tank while
tightening handles.
NOTA: Para facilitar la instalación,
presione desde arriba el tanque
mientras aprieta las manijas.
Tighten handles
alternately until the tank
contacts the front and
back of the bowl achieving
china-to-china contact.
Apriete las manijas
alternadamente hasta que
el tanque haga contacto
con el frente y la parte
posterior de la taza
logrando un contacto
cerámica-cerámica.
HAND TIGHTEN
ONLY. DO NOT
OVERTIGHTEN!
APRIETE A MANO
SOLAMENTE. NO
APRIETE DE MÁS.
!
5
Thread, then hand
tighten water supply.
Conecte y apriete la
conexion de agua.