Installation Guide

4
755117-100
5
6
INSTALLING THE SIDE PANELS ON THE WALLS
1) Place the side panel against the adhesive on the drywall and press it so the entire surface contacts the adhesive.
2) Remove the panel for 30 seconds (or longer as recommended by manufacturer) to let the solvents in the adhesive escape
and replace the panel.
3) Wipe the panel down with a damp rag while continuing to apply pressure to the panel to ensure it makes complete contact.
NOTE – WIPE ANY EXCESS ADHESIVE FROM THE PANEL WITH A DAMP RAG
1) Repeat Step 4 and above for the other side panel.
INSTALLING THE CORNER PANEL
1) Place panel adhesive on the drywall between the two side panels.
2) Use a notched trowel to spread the adhesive evenly on the wall.
3) Apply a bead of sealant along the back edges of the corner panel so adhere to the side panels.
4) Apply sealant to shower base where it will contact wall panel.
5) Place the corner panel against the adhesive on the drywall and press it into the corner of the wall so the entire surface
contacts the adhesive.
6) Remove the panel for 30 seconds (or longer as recommended by the manufacturer) to let the solvents in the adhesive
escape and replace the panel.
7) Wipe the panel down with a damp rag while continuing to apply pressure to the panel to ensure it makes complete contact.
NOTE – WIPE ANY EXCESS ADHESIVE FROM THE PANEL WITH A DAMP RAG
Apply sealant
along the back