Installation Sheet

Securing Seated Shower
In order to permanently secure the Seated Shower, a 1-1/2”
drywall screw will need to be drilled though the
Seated Shower Flange into a the wood studs.
Warning: In order to prevent cracking of
the acrylic flange, a 1/8” pilot hole should
be drilled prior to drilling the 1-1/2”
drywall screw. Care should be taken
not to over tighten the drywall screw
into the flange. Over tightening will crack
or break the flange.
Adding Drywall
After the Seated Shower has been secured to wood frame, 1/2”
drywall should be applied to all three walls. Drywall should rest
on top Shower Stall flange.
5
1/8” Pilot Hole
&
1-1/2” Drywall
Screw
Flange
Drywall