Specification

3052OD.109XXX-PC PREMIUM SERIES
30" x 52" WALK-IN BATH
3052OD.109.SXX Soaking Tub
• Tub Extender Kit to fill 60” space
• Available in White or Linen and in Left Hand or
Right Hand Door/Drain Configuration
• Watertight door system with a lifetime warranty
on the door seal
• Built-in chair height seat
• Polished chrome trim and cable driven waste and overflow
• Built-in safety bar and textured tub floor
• Patented Quick Drain® fast water removal system
• Premium tub faucet and handheld showering wand
• Partial seat transfer
3052OD.109.WXX Whirlpool Massage System
Combines all of the features of the Soaking Tub, plus:
• 12 massage jets with variable flow
• Legs-only massage
• Whirlpool in-line heater
• Self-cleaning sanitation system
3052OD.109.AXX Air Spa System
Combines all of the features of the Soaking Tub, plus:
• 26 seat and floor air injectors
• Variable speed heated blower
• Automatic purge cycle
3052OD.109.CXX Combination System
Combines all of the features of the Soaker Tub,
the Whirlpool Massage and the Air Spa Systems for
the ultimate therapeutic bathing experience, plus
• Multi-colored Chromatherapy light system
positioned at the bottom of the bath that creates
a peaceful bathing experience
GENERAL SPECIFICATIONS FOR 3052OD.109.XXX-PC
WALK-IN BATHTUB
INSTALLED SIZE ______ 52" x30" x40" (1320 x762 x1016mm)
WEIGHT _______________________________ 155 lbs (70 Kg)
WEIGHT W/WATER ____________________ 781 lbs (354 Kg)
OPERATING GALLON _____________________ 75 Gal. (284L)
FLOOR LOADING _____________73 lbs/Sq Ft (356 Kg/Sq M)
(PROJECTED AREA) CUBE FT ______________________ 36.1
AmericanStandard-us.com © 2023 AS America, Inc.
051623
Notes: The whirlpool heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.
Tub is supported by the frame and five integrated adjustable feet, no additional support required. Refer to installation instructions supplied with tub for additional
information. Provide suitable reinforcement to sub floor for all supports.
Our products are in compliance with the following codes: Uniform Plumbing Code UPC®; National Plumbing Code of Canada; International Plumbing Code IPC®
Our products conform to the following standards: ASME A112.19.7, ASME A112.19.15; CSA B45, CSA B45.5; CSA C22.2 No. 218.2; UL-1795; ANSI Z124.1.2
Our products are listed with: c ETL us
IMPORTANT: Dimensions of fixtures are nominal, may vary and are subject to change or cancellation. No responsibility is assumed for use of superseded or
voided leaflet.
To Be Specified - Required:
❏ Drain Configuration: Left (L) or Right (R)
❏ Color: White (W) or Linen (L)
Options:
❏ Handshower Glide Bar: 9HSB
❏ 24 inch Grab Bar: 9GB-24
❏ Neck Rest: 9NR